2UUL SD90 Stripped ScrewExtAractor Drill Set

Remove stripped micro screws from phones and electronics with the 2UUL SD90 carbide extractor drill set. Two-step drill & extract system with a solid brass collet handle.

• Two-step extraction system — One carbide bit cuts a clean pilot hole in the damaged head; one serrated extractor bit grips it and reverses the screw out. Two bits, one handle, no tool-swapping mid-job.
• Tungsten carbide, abrasion-resistant — Ground from tungsten carbide so the cutting edges survive repeated use and bite into hardened or thread-locked screw heads instead of skating over them.
• Effortless grinding, quick removal — Fine-toothed geometry removes material fast and bites early. You spend seconds on the screw, not minutes.
• Solid brass collet handle — A knurled brass body gives you fingertip control and a firm, non-slip grip. No drill, no trigger, no torque spike.
• Fixing bolt lock — The side fixing bolt clamps the bit dead-straight in the collet. No wobble, no wandering, no scratched frame.
• Built for micro screws — The go-to fix for stripped iPhone bottom screws, plus pentalobe, Phillips and Torx screws on tablets, laptops, drones, cameras and wearables.
• Pocket-sized and workshop-ready — Ships in a clear 54 × 32.5 × 20 mm hinged case, 11 g net. Toss it in your repair pouch and it's there when you actually need it.

  

SD90 stripped screw extractor set

2UUL screw extractor drill set

SD90 drill set with warranty

2UUL SD90 Stripped ScrewExtAractor Drill Set Images